Metal Wire Torsion Testing Machine
Working principle:
One-way twisting: The sample is rotated 360 degrees in one direction around its own axis as a twist to the specified number of times or the sample breaks.
Bidirectional twisting: The sample is rotated 360 degrees in one direction around its own axis as a single twist until the specified number of times, then rotated in the opposite direction the same number of times or the sample is broken.
Applicable standards:
The metal wire twisting tester is applicable to the People's Republic of China Standard GB/T 239.1-2012 "One-way torsion test method for the first part of metal material wire", also applicable to the international standard ISO 7800:2003 "One-way torsion test method for metal wire rod" and ISO 9649:1990 "Two-way twisting test method for metal wires".
Main purpose:
The metal wire twisting tester is suitable for measuring the ability of a metal wire with a diameter (or feature size) of 0.1-10.0 mm to withstand plastic deformation in a one-way or two-way twisting and to display defects on the surface and interior of a wire material (actually with a 0.06-3 mm test fixture. ).
Specimen:
The test piece shall be as straight as possible and straightened if necessary, but it shall not injure the surface or distort the test piece. In order to make the test specimen straight during the test, some kind of tension should be applied. The tension should not be greater than 2% of the corresponding force value of the nominal tensile strength of the test wire. The axial force is increased by the weight. force.
Technical Parameters:
| Can hold the diameter of metal wire | 0.1 ≤ d (D) <5 |
| The gauge length between two clamps | ≤500mm |
| Jaw clamp specific outer diameter | 74mm |
| Jaw clamping range | 0.1-1mm, 1mm-5mm |
| Torsion speed | 30,60,90; 120; 180; 300r/min |
| Speed error | <±10% |
| Minimum number of turns reading | 0.1 |
| Two chucks coaxiality (mm) | <φ0.4 |
| Parallelism of moving rail (mm) | <0.2 |
| Jaw hardness (HRC) | >55 |
| Test machine size (length * width * height | about 980 × 400 × 600mm |
| Machine weight (net weight) | about 150kg |
| Power supply | AC 220V 50Hz |
| Noise | <50 dB(A) |
| Aassembly quality in line with national standards | GB/T2611 |
| Packaging, transportation in line with the Ministry of Machinery standards | JB/T6147 |
| Working method | Automatic loading |
| Display | LCD screen Chinese character menu display |
Random list:
1, Tools, weights 1 set
2, Testing fixture 1 set
3, Technical information, etc. 1
Product Tags:
|
|
Metal Wire Torsion Testing Machine Images
|
